Tag Archive | necklace

Back to work!

Well folks, the summer is over and so is my vacation and my slow down, things are now moving apace!  Since I last posted, I have finished a few aprons, a pair of pants,  and a tunic.  I made out like a bandit at the McCalls $.99 out of print clearance sale.  I bought about 15 patterns, some for me and some for my niece and some for aprons to make for sale.

I also cut out a number of items which I am going to start sewing this week.   I started designing for WM Bridal, the new line I am going to add to my Etsy shop.  I registered for 2 craft shows this November at the Ottawa RA Centre in the Clark Room on November 16th and 30th.

Here are the aprons I have made so far.

 

This is what it was supposed to look like, (far right with the scalloped edge)

New Picture

Now, as you can see, what I created is completely difference from what it is supposed to look like.  This is because the scalloped edge came out looking horrible!   So after cutting off the scalloped bit, I didn’t have a very big piece left so I took the accent green and created a gathered skirt-like piece with patches from the main fabric.  The carrot patch is a secret pocket.

The other two when MUCH better!

B5436

image_4

This one is cute, I used some sheer lacy fabric for the flounce and the ties at the back. and I am pretty happy with the results.  I can see trying the other versions on this pattern.

image_6

This one is my favourite!  It is hard to see in the picture, but the fabric is little owls, with red linen accents.  The pattern is a retro one either from Vogue or Butterick, I can’t remember, (I will add the info later when I find the pattern).

 

FOUND IT!

S2592 Simplicity Archives 2592!  View B.  I want to try View C next!

Those are the projects I have actually completed in the last month or so.  Here is what I have cut out that I am going to start sewing this week!

image

 

A Jumper, skirt and blouse for me.  A t-shirt and blouse for my niece, and three aprons for upcoming craft shows!  That should keep my Jenome working overtime for a while.  I also ordered Simplicity 4940 for a Halloween costume for myself,

http://www.simplicity.com/p-2201-costumes.aspx

New Picture (4)

I can’t decide between the Arwen dress and the Eowyn dress.

Now for the Jewelry items.  I haven’t been as busy with this as with the sewing.

I have started developing some items for what I am calling WM Bridal.  I started working with some sterling silver and fine crystal for some items, but also with silver plate and glass for bridal on a budget.  My own bridal set was silver plate and crystal.

Here is what I have come up with so far.   I would love some feedback, items that you like, and things that maybe could be better, or things you would like to see.

il_570xN.653652192_sk68 il_570xN.653650818_c589 il_570xN.653648590_cizm image_3

 

I also did a really neat up-cycled necklace out of different chains that I got from my Uncle whose father had owned a jewelry store, combined with beads that I salvaged from some old costume jewelry my Aunt gave me from her theatre group that wasn’t being used.

I really like the effect!

 

image_1

Well, I think that might be it for now.   I have lots of work to do this fall.  I can’t wait!

and sew on

and sew on and sew on.

It’s been a busy craft week this week!   The last time I was in Michael’s buying feathers for hair combs, I also took home a collection of glass pearls in pink and chocolate brown, of various sizes.   So besides to take a break from doing chain maille, I made this elegant (at least I think so) graduated pearl necklace with matching earrings.

graduated Chocolate Pearls  I will have to get some better pictures and get it up on Etsy.

Saturday my DH and I were exploring Kanata and I insisted we stop in at the Fabricland there, which is sadly closing, but at which pretty much everything is 60% off!  Oh my goodness, self-control was going to be needed!

I was looking for black 1/2″ wide, singlefold bias tape for my dress, along with some tracing paper and a wheel.  No tracing paper or wheel to be found and the only bias tape in the size I needed that was even close was beige, so I got the beige because it accented the dress nicely which has beige in the pattern.   However, what I DID find was a TON of fabric on sale.  I was like a kid in a candy store!

I came away with three different fabrics, 11 metres in total, the bias tape and lots of thread for less than $100!

Fabricland Score!

The black and white fabric is cotton with some stretch, the blue floral is 100% cotton and the blue wavy fabric is a knit.  I have already cut out a little t-shirt in the knit from this pattern.  I think I am going to make the tunic pattern that is the same as the dress I am making in the blue floral.

New Picture  I may attempt to assemble this on my own and then cut out something else for next weeks class.  Ambitious I know!

Yesterday evening was sewing class, and I started to assemble my spiffy new dress! It was a lot harder than I thought it would be to get the pleats right and lining everything up properly. Still, the overall construction of the dress if fairly simple, and that wonderful wonderful Janome still purrs its perfect lullaby. It also includes features such as built-in seam allowance markers on the bed of the machine and little numbers to help you thread the machine with ease (which is good because I forgot the instruction booklet at home).

I was really hoping and expecting to finish the dress in class and maybe even start out on the shirt I cut out, but getting the pieces together properly and getting the bias tape in took a bit longer than expected.  I got pretty far though and now all that is left to do is to finish the neck, and hem the sleeves and bottom.

Of course I had to try it on as soon as it went together, and it fits great and is quite comfortable! I am going to whip up a little tie belt to go with it as well.

I figured I would practice my modeling skills 😉

Unfinished Dress

I will get a better picture once the dress is actually finished.

Of Snow and Shows and Other Things

Well hello there faithful readers.  I know it has been a while, but here in Ottawa we have been doing a bit of hibernating as temperatures have dipped below -30 more often than I think I am equipped to deal with!

I wasn’t able to get much crafting done in the first part of the month as I spent an entire week sick in bed, too sick to go to my craft room…that is SICK!  Not that the time was entirely wasted.  I did teach myself how to crochet a granny square and have since made quite a few as well as starting a blanket project.  I realized it was time to start using up some of my vast yarn stash so I took out all my worsted weight yarns in greens, blues as well as tan and grey and decided to start a blanket made to look like a simple topographical map of an island. I have made it out to sea, but ran out of navy yarn, so I need to buy some more yarn.

island beginsisland blankie

It have another baby blanket on the needles in a aqua and white basket weave at the moment as well, so anyone I know who gets pregnant in the next year is in for a treat 🙂

I did finally kick the cold to to curb a week ago which was a very good thing.  Besides the obvious lack of coughing, I got an email from the Trend Arlington Community Association to let me know that Feb 2nd, they were having a garage sale/craft market at the Community Centre.  I happy applied for and got a table, so now I had something to get making jewelry for!

Bracelet Rainbow

new bracelets

I am still pretty hooked on my Rainbow Jump Rings, so I made a few really neat bracelets with those.

I also made a number of really pretty earrings in cut glass and glass pearl.

I didn’t bring my full set up from the Christmas Show, just my Eiffel Tower for Necklaces, my earring case and a tray for bracelets.

WM Table

At first the turn out was great!   Sadly it started to snow pretty heavily and it slowed down, but I still had a great show and made lots of sales!   I can’t wait to do another one!

I also have a number of new items now to put up on my Etsy site, which will be my plan for this weekend.

Till Next Time!

 

Craft Shows, Display Cases and Frustrating Chain Maille Weaves.

First of all, today is Remembrance Day, and though my office is open today, being downtown Ottawa I made sure to visit the Cenotaph at lunch to lay my poppy on the grave of the unknown soldier.  It is a good to reflect on the sacrifices made by our service men and women throughout history and give them our thanks.

it’s been a busy few weeks.  I made it through my first craft show on November 2nd.  What a day!   it began Friday night with taking my gear over to Meghan’s house and helping her load up her car with all the displays for the booth.  She really goes all out it is very impressive!  Meghan picked me up at 6:30am and after whipping through the Tim Horton’s drive through we made it to Kanata by 7.   We found our table and then set up.  We finished well before 9am when the doors opened. Our booth looked fantastic! As for my sales, well, certainly NOT fantastic.  I sold about 5 items, so not bad for a first showing.  Still there is something really quite demoralizing about seeing people look at something you have made, something that you are proud of, that was a lot of work, and pass it over.  I suppose it must be the same for any crafter.  I tried to stay positive but it was difficult at times.  Still, there is something equally wonderful about someone picking up one of your pieces and deciding that it is exactly what they are looking for.  That is a great feeling!  When I finally arrived home at about 5pm, I made it as far as the couch before I passed out for a couple of hours.

The other thing I am rather proud of that happened in the last few weeks is that I finally mastered Half Persian 3-1 weave.  Oh, My, Freaking, Goodness but it is frustrating!  I used to know it, but somehow had forgotten and it is one of those weaves that can very easily go wrong. It is a matter of keeping a firm hold on the rings in just the right configuration until the pattern stabilizes, and even then, ring placement can be tricky.  There are lots of different videos on YouTube with different tutorials, but I did finally manage to find one that worked for me.  Either way, I am quite pleased with the results and pretty sure I can pick it up again any time.

BYmbyVUIIAA7bHg

 

This coming weekend the 16th of November I will be at another local craft fair.  This time at the Trend-Arlington Community Centre, Ottawa South.  I have the table to myself this time so I have had to give a lot of thought to how I want to display my work, given that I don’t have a large number of displays already.   What I do have is a very handy husband who made me an excellent display case for earrings out of two picture frames,  that folds up with a latch and handles so I can carry it without having to load and unload the earrings.   As for displaying bracelets, I found these cube shelves that my husband had in his condo the smallest about 6 inches square and the largest, maybe 12, and I thought, hmmmm.  I also have, that I had forgotten about, a nearly identical set in dark brown, that are just a little deeper than the black ones.  So what we have decided to do is attach a number of small brass tea-cup hooks to them and then we will use temporary two-sided mounting tape to hold them in a pattern that works with the table (which will have to wait until I see it on Saturday).  This way we can display my bracelet collection!   I also found a non-decorative use for my big (although smaller than the original) silver Eiffel Tower.  It stands about two feet high and very conveniently, I can hang a whole bunch of necklaces from it using small metal “S” hooks.  So right now my dining room table has been given over to practice set up.   I will make sure I get a picture of the booth on Saturday.

Well, till next time folks.

One week to go!

Well in one week from today I will be exhibiting at my very first craft show. I have been scrambling to get more items made and of course whenever I do that I inevitably discover that I am missing some crucial piece, like antique brass jump rings to go with a necklace I just made or the little cards for putting pairs of earrings on. So as I work, the list of things I have to pick up at the shop grows. One of the challenging things is pricing my items, as well as tying to know what people might be interested in. For this show at least I am sharing a table with my friend Meghan, on the 16th though, I will be solo, just my own work on display. I have to admit I am nervous. I want to make sure I have lots of great things for people to choose from.

This week wasn’t much for productivity as I spent it suffering from a beast of a head cold. Wednesday I only left my bed long enough to make…Huh, I don’t actually remember what I made. Oh well. Thursday I got up, showered and made it as far as the couch before I gave up. I spent the entire day curled up with movies, audiobooks and chain maille. Friday I actually made it into the office. Today though I spent the whole day in the craft room, and besides organizing and pricing items, I made a couple of pretty simple beaded necklaces. Here is a small sample of what I have made.

20131026-192946.jpg

Getting ready for my first craft show

On November 2nd I will be joining my friend Meghan at my very first craft show at All Saints High School in Kanata.  So I have been busy getting lots of fun things ready to bring.  The only other sales I have done have  been in my own house with varying success.  I am not really sure what sorts of things I should bring to the show so I have been making lots of different items.  Here are a few different examples.

Image

Image
Picture 011 Picture 016 Picture 018 Picture 021 Picture 025 Picture 028 Picture 032 Picture 035 Picture 038 Picture 040 Picture 043 Picture 045 Picture 048

 

 

I Just Can’t Get Enough!

Of my new aluminum jump rings that is!  Since last we chatted, I have made another chain maille ball, some earrings and have experimented with a couple of new weaves.  Also incorporating some of my usual plated base metal rings and beads.

lPicture 598

You can’t go wrong with byzantine!

Picture 554 Picture 542

I love this lace like weave I found in a magazine!Picture 568

The chain maille ball is a current favourite!

Picture 573

The great thing about the aluminum is that you can make a dense weave like full Persian and it is still super light to wear.

Picture 599Something simple to show off the bright green rings and the delicate leaf beads.

1235520_10151901653726217_99163204_n (1)Picture 587

This weave makes great earrings as well as bracelets, but it can be frustrating to assemble at times.
Picture 603

I do love the rosette look and you can’t go wrong with adding crystal to pretty much anything as in the case of the barrel weave with 6mm sapphire bicones below which makes for a rather glamorous necklace.

Image
As you can see, I have been very productive in the last couple of weeks.  Thursday, my friend Meghan came over for an evening of pizza and beading.  We both decided that it was a chain maille kind of event.  I still have a fair amount of the colourful anodized aluminum jump rings that I got from the Ring Lord and so I made another chain maille ball, this time in black and red.

Image

Now that I have a comfortable grasp  of the pattern itself, I can now play with the colour schemes some more.

I also made a few other items that night and last night as well. There was a new chain maille weave I was itching to try out called Inverted Round, I got the pattern from CGMaille.com.

Picture 619

The first one is a mix of bright aluminum and a regular aluminum with a section of black worked in.

Picture 620

I also had a lot of red, green and gold, so I thought, hey, something for the festive season.

The next pattern from CGMaille.com that I want to try is the Dragon Scale and the inverted Round with Captive Rings.

I also have taken a liking to making rosettes from rings, some with just three, like this cutey cute bracelet in pink, purple and lavender.

Picture 614

And some with with many rings to make a dense almost ball like rosette.

Picture 615

I also used one of my favourite patterns, the size 2 seed bead and 9mm jump ring, to make this fun rainbow bracelet!

Picture 616

Yesterday I put another order in to the Ring Lord for more aluminum jump rings in rainbow colours which I cannot wait to get working with!

Till next time 🙂